Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2004
    Location
    Eastern Suburbs Melbourne
    Posts
    218

    Default Suitable QCTP and milling vise

    There is a 3 day Hare and Forbes sale starting tomorrow in Melbourne. I would like to purchase a QCTP for my 9 x 20 lathe and a milling vise for a HM10 mill (which is a small mill and thus limits the size of the vise that can be fitted).

    If you have purchased a QCTP and or milling vise for the abovementioned equipment, can you provide some feedback on them please? Are you happy with your purchases?

  2. #2
    Dave J Guest

    Default

    Not sure about the vise, but the toolposts from the US are allot cheaper for the same thing, you will end up with 3 times more holders for the same money.
    Have a look here for more info
    http://www.woodworkforums.com/f189/i...ol-post-96466/
    Dave

  3. #3
    Join Date
    Nov 2004
    Location
    Eastern Suburbs Melbourne
    Posts
    218

    Default

    Thanks, Dave, I've noticed that many people choose to buy from overseas rather than H & F, why are H & F so expensive?

  4. #4
    Dave J Guest

    Default

    Quote Originally Posted by Tiger View Post
    Thanks, Dave, I've noticed that many people choose to buy from overseas rather than H & F, why are H & F so expensive?
    Not sure why, the machinery seems to priced reasonable, but the tooling seems high.

    I have never bought anything of that fellow over in the US, but I have only heard good about him.
    If I had of known a few years ago about his tool posts I would have bought mine from there.
    I paid $495 for my QA150, when could of had one of his tool posts and around 20 holders, instead of 4 for around the same money. One thing you need with QC tool posts is holders, or you will spend your time swapping tools in the holders, which is why you buy a QC in the first place, to save time. I have 6, but could do with a lot more.

    If you do decide to go with the H and F tool posts, the quality of mine is excellent it's really nicely ground and I don't have any problems with it at all, other than the price, and the holders are harder to get elsewhere because there the Dickson style.
    Dave

  5. #5
    Join Date
    Dec 2009
    Location
    Hobart, Tasmania
    Posts
    42

    Default

    Hi Tiger,

    I have purchased a lot of stuff from CDCO over the last 3 months since buying a 9x20 lathe and BF20 mill.

    I have been very happy with the prices and quality of the equipment, taking into consideration the price. Most of the equipment will last a long time if looked after and treated right.

    The QCTP type AXA is as good and in fact the same as the H&F variety. The only problem I have had with the tool holders is that the grub screws have very shallow hex recesses and I have replaced them with better ones.

    The vise I also purchased at the same time is the 4" Precision Screwless Vise ($78) and it is of top quality. It does not come with lock down clamps and I needed to purchase 1 set of these from Little Machine Shop (in the USA) as Frank does not sell these.

    For more details look at the CDCO webb site. Can be found by typing in CDCO into your search engine.

    Cheers

    KenM

Similar Threads

  1. New QCTP - which one?
    By markjaffa in forum METALWORK GENERAL
    Replies: 3
    Last Post: 16th Nov 2009, 05:04 AM
  2. Right QCTP for me?
    By ElDubya in forum METALWORK GENERAL
    Replies: 2
    Last Post: 12th Nov 2008, 11:51 PM
  3. Qctp - al320g
    By barkersegg in forum METALWORK GENERAL
    Replies: 13
    Last Post: 27th Aug 2008, 03:19 PM
  4. H&f Qctp
    By Beerbotboffin in forum METALWORK GENERAL
    Replies: 11
    Last Post: 7th Nov 2007, 05:36 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •