Needs Pictures: 0
Results 31 to 45 of 60
Thread: VFD control panel cable ?
-
15th Jul 2018, 03:52 PM #31Most Valued Member
- Join Date
- Apr 2012
- Location
- Healesville
- Posts
- 2,129
ISACON - HY Series VFD
Yup.... its not a Huanyang.
I thought it a bit odd as there is no manufacturer name on the VFD and also not obvious on or in the booklet
that came with it, the name "ISACON" (chinglish for "is a con") is only to be found in a paragraph about warranty.
I thought okay.... before I hang that book on the nail in the dunny I will read it even tho I don't know what it means.
I got to "Pn 04 Source of runtime command with range, 1 - 2"
hmmmm...????...tick tick tick clunk tick tick squeal tick tick tick..???....... Ahhhh Sssooooh......maybe runtime = go????
YIPPEE
You lose the reverse button but for what I want here that is cool and I only have 2 wires for each VFD to remote stop and start.
So its a whizzer
cheers from a very happy shed
and, ah tho....need click click switch not momento switch.
-
15th Jul 2018, 03:59 PM #32Member: Blue and white apron brigade
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 7,189
So much joy from such a simple thing - love it.
-
19th Jul 2018, 01:20 PM #33Novice
- Join Date
- Feb 2018
- Location
- Florida, USA
- Posts
- 20
Shed
You fellows seem to have a good idea of what you are doing. If I might I would like a little help on wiring a remote control panel on the mill. I have a 2 hp 3 phase on my mill and I would like to wire it up to make it more convenient when working. The Attached thumbnail is exactly the same as mine but mine is 220 single input and 3 phase output. The second picture with all the terminals needed is the same. Any help would be more than appreciated.
Nelson
-
20th Jul 2018, 06:59 AM #34Most Valued Member
- Join Date
- Apr 2012
- Location
- Healesville
- Posts
- 2,129
Hi Nelson, l dont see any pics?
-
27th Jul 2018, 11:23 PM #35Golden Member
- Join Date
- Jun 2007
- Location
- Vic
- Age
- 48
- Posts
- 544
I bought the "ribbon" and plug from Altronics.
https://www.altronics.com.au/p/p5310...unting-socket/
https://www.altronics.com.au/p/w2610-10-wire-idc-cable/
-
28th Jul 2018, 05:29 AM #36Novice
- Join Date
- Feb 2018
- Location
- Florida, USA
- Posts
- 20
Hello All
I would like to wire up my VFD so I can operate it from on the machine instead of at the VFD. In this write up I've seen VFD like mine and I just need some help in what I need to do to get it done. Here are the pics of my VFD, several pages from the manual and hope I got enough to get me home.
Thanks for all the patience and help.
Nelson
100_1361.jpg100_1365.jpg100_1371.jpgvfd WIRING BANK.jpg
-
29th Jul 2018, 01:11 PM #37Novice
- Join Date
- Feb 2018
- Location
- Florida, USA
- Posts
- 20
-
29th Jul 2018, 01:36 PM #38Novice
- Join Date
- Feb 2018
- Location
- Florida, USA
- Posts
- 20
When I took the pics I got the wrong one for the wiring figure. It was this one that is posted earlier in this thread.
This is the right picture and when using 220 volt single phase you use the "R" and "T" leads.
The VFD is in operation, I would just like to use my converter with a remote panel, not the factory panel. The buttons will fail soon or later.
HELP.
Nelson
-
29th Jul 2018, 04:26 PM #39Member: Blue and white apron brigade
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 7,189
Nelson, the circuit diagram is self explanatory.
If you cannot work it out from the diagram that indicates to me that you may not be able to follow any advice provided through this forum either.
Perhaps you should hire someone to do it for you.
-
29th Jul 2018, 06:42 PM #40Senior Member
- Join Date
- Oct 2015
- Location
- melbourne
- Posts
- 473
You will need to think about what functionality you want - just run/stop? Reverse? Variable speed? Jog?
Its not complicated as such, but as Bob called out, if the diagram is not clear to you, then you probably do need someone on hand to sort it for you.
I'm sure though you can build up the actual remote console.
240v is not something to learn electronics on....
Russ
-
30th Jul 2018, 08:52 AM #41Novice
- Join Date
- Feb 2018
- Location
- Florida, USA
- Posts
- 20
Russ
It is not the 240v I am dealing with. 5 to 12 volt is not that dangerous. I wired in the Potentiometer, it works fine and I do not see anything special about the switching. Are they just a push button switch?
Thank you
Nelson
-
30th Jul 2018, 10:33 AM #42Diamond Member
- Join Date
- Jun 2010
- Location
- Canberra
- Posts
- 1,322
-
30th Jul 2018, 11:27 AM #43Novice
- Join Date
- Feb 2018
- Location
- Florida, USA
- Posts
- 20
Rusty
Thank you and I guess I just needed some conformation.
I do not understand the resistance from some. If I fry the unit it cost me, if it kills me because of my stupidity it is my fault. I did not get to be 60+ and not learned to be safe.
Thank you so very much Rusty. I get my panel together and post a pic soon.
Nelson
-
30th Jul 2018, 08:13 PM #44Most Valued Member
- Join Date
- Apr 2012
- Location
- Healesville
- Posts
- 2,129
Hi Nelson, that looks like the same inverter that i am using, you will need toggle switches and will need to change the setting"Pn 04 Source of runtime command with range, 1 - 2" to get those terminals to operate.
I will get my manual from the shed tomorrow and if you have questions i might be able to help.
cheers, shed
-
31st Jul 2018, 03:28 AM #45Novice
- Join Date
- Feb 2018
- Location
- Florida, USA
- Posts
- 20
Shed
Thank you so very much. I have got the programming down, it was just the kind of switch to use? Now you say toggle and what I have read it is momentary? Confusing.
Nelson
Similar Threads
-
Cable disc brakes routing of cable.
By gros21 in forum TRAILERS & OTHER FABRICATED STUFFReplies: 3Last Post: 14th May 2017, 06:41 PM -
Vfd control panel
By russ57 in forum ELECTRICALSReplies: 7Last Post: 29th Mar 2017, 01:19 AM -
Milling machine control panel issue
By oohsam in forum METALWORK GENERALReplies: 33Last Post: 23rd Dec 2016, 08:13 PM -
VSD Remote Control Panel Questions
By markjaffa in forum METALWORK GENERALReplies: 28Last Post: 20th Apr 2010, 05:15 PM -
7 x14 control panel puzzle?
By Malfie in forum METALWORK GENERALReplies: 3Last Post: 11th Jul 2007, 11:35 AM