Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
28th Mar 2018, 10:11 AM #1
WTB 1.1 kw 2800 rmp 3 phase motor
I have a lathe for which I need a 1.1kw / 1.5hp motor or perhaps 2 hp.
I need to run it off a VFD so delta connection is a must and 2 pole will give me the lathes full speed range
Preferably Perth or within driving distance.
Thank you MarkI've become a tool of my tools.
-
28th Mar 2018, 11:02 AM #2Member: Blue and white apron brigade
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 7,189
I have a 2.5HP Electromechanica (Italian) motor with a 21mm shaft in my shed that is delta convertible.
If the excessive power worries you then program the VFD to limit the current to the motor.
If you only have a 1.5kw VFD you can still use it and limit the motor current
Unfortunately it is flange mounted but if you needed to it would be dead easy to weld up a foot mount for it
PM me if you are interested
-
28th Mar 2018, 07:24 PM #3
Thanks Bob I'm sure its a good motor, but I'm hoping for a foot mount.
I have a lot of work to do already and one more job is one too many.
Thank you MarkLast edited by Poloris; 28th Mar 2018 at 07:32 PM. Reason: did not capitalize Bobs name.
I've become a tool of my tools.
-
16th Apr 2018, 11:45 PM #4Most Valued Member
- Join Date
- May 2011
- Location
- Murray Bridge S Aust.
- Age
- 71
- Posts
- 5,959
Hi Mark, possibly have a couple of motors for you, I know one was set up to run off a VFD, but not sure of the rating/rpm as the plate is damaged/missing, if it's of any help to you.
KrynTo grow old is mandatory, growing up is optional.
Similar Threads
-
3 Phase Generator Motor Powered by Single Phase Motor?
By gazza2009au in forum ELECTRICALSReplies: 49Last Post: 4th Apr 2020, 04:38 PM -
Single phase Vs 3 phase motor ratings.
By KBs PensNmore in forum ELECTRICALSReplies: 56Last Post: 17th Sep 2017, 05:37 AM -
Replacing A Single Phase Motor With A Three Phase Motor....................
By matthew_g in forum METALWORK GENERALReplies: 26Last Post: 1st May 2015, 04:42 PM -
rewire 3 phase motor to single phase
By thorens in forum METALWORK GENERALReplies: 36Last Post: 5th Sep 2014, 07:16 PM -
Looking to swap a 2Hp single phase motor for 1.5 or 2Hp 3-phase motor
By jhovel in forum METALWORK GENERALReplies: 7Last Post: 10th Mar 2014, 07:26 PM