Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3

Thread: gears

  1. #1
    Join Date
    Apr 2014
    Location
    Perth
    Posts
    134

    Default gears

    hi
    anyone know of a source of small gears suitable for a mill drill quill feed or similar uses
    thanks steve

  2. #2
    Join Date
    Jan 2004
    Location
    Mackay North Qld
    Posts
    6,446

    Default

    Hi Steve,
    You will get much better feedback if you can give better information.

    Make and model of your mill drill.

    The size of the gears, number of teeth, are they cast iron steel or plastic?

    Are the feed gears missing or just damaged?

    If only damaged, perhaps some dimensions of what you have.

    One of our members may have just what you want, but unless you give them something specific to identify the parts needed, they or you may never know
    if the parts will be suitable.



    Grahame

  3. #3
    Join Date
    May 2011
    Location
    Murray Bridge S Aust.
    Age
    71
    Posts
    5,942

    Default

    Sorry Steve that's a bit like asking how long is a piece of string.
    If it's really small stuff try Aussie machines or something similar, the gears used in the X model Milling Machines and the C series Lathes.
    As Grahame mentioned, if you were to supply a sketch or details of what you're trying to do it would help a great deal.
    To grow old is mandatory, growing up is optional.

Similar Threads

  1. Gears, gears and more gears
    By .RC. in forum METALWORK GENERAL
    Replies: 41
    Last Post: 22nd Jul 2014, 12:41 PM
  2. Cutting gears?
    By neksmerj in forum METALWORK GENERAL
    Replies: 17
    Last Post: 18th Mar 2011, 06:22 PM
  3. Change Gears Again
    By Bryan in forum METALWORK GENERAL
    Replies: 47
    Last Post: 24th Jan 2011, 10:14 PM
  4. 260 BM,CM,B&C Compound Gears
    By pipeclay in forum THE HERCUS AREA
    Replies: 0
    Last Post: 11th Jan 2010, 06:58 PM
  5. Change Gears
    By pipeclay in forum THE HERCUS AREA
    Replies: 0
    Last Post: 8th Oct 2009, 02:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •