ER32 to be available shortly!
Well, as proposed, ER32 12-sided collet blocks (with a larger across-the-flats dimension than the nut diameter) have been made. They will arrive in Australia shortly.
As with the ER40 blocks available already, they will allow 1,2,3,4,6 and 12 position direct indexing and workpiece replacement without removal from jigs or fixtures. Both can also be used vertically, as there are no protrusions on the end opposite the collet and nut.
M&G Productions are the sole distributor in Australia, USA, Europe and China.
http://www.mag-pro.com.au/images/201...8216249131.jpg