Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 21 of 21
Thread: Building a cold saw
-
2nd Sep 2018, 11:55 AM #16Member: Blue and white apron brigade
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 7,189
-
2nd Sep 2018, 08:19 PM #17Most Valued Member
- Join Date
- Nov 2008
- Location
- North Brisbane. Qld. Australia
- Age
- 70
- Posts
- 1,513
I know, but that is the biggest motor you can get to mount to a B5 flange the size I have on the gearbox. Maybe a custom flange to suit a 1HP? Have to look into that. Anyone know just what torque I would need to drive the cold saw blade?
Nev.
-
2nd Sep 2018, 09:23 PM #18Most Valued Member
- Join Date
- Nov 2008
- Location
- North Brisbane. Qld. Australia
- Age
- 70
- Posts
- 1,513
Looks like a bigger motor with a reducing flange may be available to order so I will look into that. Shaft size will be either 19mm or 24mm depending on size of motor so that will need to be modified to suit the gear. Motor frame size of flange on gearbox is 71. Next sizes up in motors are 80 an 90.
Nev.
-
2nd Sep 2018, 09:32 PM #19Member: Blue and white apron brigade
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 7,189
-
5th Sep 2018, 01:46 PM #20Most Valued Member
- Join Date
- Nov 2017
- Location
- Geelong, Australia
- Age
- 57
- Posts
- 2,672
You might find the specs in this Brobo cold saw manual useful:https://s3-ap-southeast-2.amazonaws....ovember+17.pdf
Looks like their biggest motor is 1.7kW (~2.2HP)
Steve
-
5th Sep 2018, 09:05 PM #21Most Valued Member
- Join Date
- Nov 2008
- Location
- North Brisbane. Qld. Australia
- Age
- 70
- Posts
- 1,513
Similar Threads
-
cold cut saws - ?
By steamingbill in forum METALWORK GENERALReplies: 8Last Post: 7th Oct 2015, 08:31 PM -
Cold Saw
By Marc in forum METALWORK GENERALReplies: 8Last Post: 3rd Sep 2012, 09:27 PM -
Anyone have a Cold Saw (wet)?
By variant22 in forum METALWORK GENERALReplies: 6Last Post: 26th Aug 2012, 10:53 PM -
Cold Saw Options: Triton, Cold Saw, Power Hacksaw
By Jarh73 in forum METALWORK GENERALReplies: 41Last Post: 2nd May 2012, 09:15 PM -
Cold Saw
By dakotax3 in forum METALWORK GENERALReplies: 5Last Post: 6th Feb 2012, 10:43 PM