Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Rexman Lathes
-
29th Dec 2017, 04:42 PM #1New Member
- Join Date
- Dec 2017
- Location
- Berwick Vic., Australia
- Age
- 72
- Posts
- 2
Rexman Lathes
Not sure if this qualifies for antique or not, but I was recently given an old metal working lathe by a friend of a friend. Although partly dismantled & unused for many years I was assured it was in working order. Knowing absolutely nothing about metal working lathes, I set about restoring it &, after a few adventures, have now returned it to working order. Here's a handful of before & after pictures. Now all I have to do is learn how to use it & start making some stuff. Google tells me that this lathe, a Rexman, was built in Richmond Vic by a company owned by Rex Osman, probably sometime between the late 1930's & early 1950's, but that's all I can find. If anyone is able to provide any more information about Rexman lathes, I would love to hear from you.
IMG_20171202_122119400.jpgIMG_20171202_122133523.jpgIMG_20171202_122156358.jpgIMG_20171229_153334116.jpgIMG_20171229_153320766.jpgIMG_20171229_153346755.jpgIMG_20171229_153400776.jpgIMG_20171229_153411882.jpg
-
29th Dec 2017, 09:46 PM #2
macjayeff
Welcome to the forum.
Nice restoration. I hope you have two lathes,
That one is just far too nice to get dirty
You may have been here Rexman lathe
Look out for a PM with links to Terms of Use and Asking questions. I send them to all new members
Grahame
-
29th Dec 2017, 10:48 PM #3
I recall helping a friend transport one of those Rexman lathes around 1989 . A elderly retired toolmaker had given the lathe to my friend and we loaded it into my Holden HR ute for the trip from Chelsea to Hallam. My friend kept the Rexman for a few months and then he sold it for $1200 !
-
30th Dec 2017, 03:07 PM #4Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 6,218
I hope he gave the money to the elderly retired toolmaker. Or offered to.
I bought a hydraulic drill on ebay after a person told me he was "helping" out a new widow clean out the shed of her deceased husband. He saw this new drill and got it for nothing. He knew it retailed for over $1200 new, but took advantage of the widow not knowing anything.Gold, the colour of choice for the discerning person.
-
30th Dec 2017, 06:28 PM #5Most Valued Member
- Join Date
- Jul 2016
- Location
- Melbourne
- Age
- 35
- Posts
- 1,522
I had one given to me a number of years ago along with a hand shaper, but it had a broken rear spindle gear that drives the tumble reverse, it was because a deep keyway was put in a zamak (weak zinc alloy) gear and it must have split apart under heavy load. I ended up remaking the gear and giving the lathe to a friend as it was too small for my general work.
-
31st Dec 2017, 05:19 PM #6New Member
- Join Date
- Dec 2017
- Location
- Berwick Vic., Australia
- Age
- 72
- Posts
- 2
Sounds like a profitable venture. I might have to consider the same course of action.
-
21st Feb 2018, 01:12 PM #7Senior Member
- Join Date
- Feb 2014
- Location
- Werribee, Melbourne
- Posts
- 178
Another one comes out of the woodwork - I helped a friend pick one up last weekend.
It looks to be slightly earlier than the restored one shown here as it has flat belt pulleys and the compound mounted with a single bolt.
It doesn't look to have been abused much and seems relatively intact. It came with quite a number of change gears but no threading plate on the gear cover as shown on the one restored by the OP.
This has a layer of dirt and sawdust impregnated oil that have kept it rust-free in all the important areas so should come up a treat with a really good clean.
Ray
IMG_0278_2.jpg
Similar Threads
-
Little lathes
By lightwood in forum METALWORK GENERALReplies: 1Last Post: 30th Oct 2016, 07:00 PM -
Some of my lathes!!
By johnbaz in forum ANTIQUE AND VINTAGE MACHINERYReplies: 4Last Post: 17th Aug 2016, 11:31 PM -
Anyone heard of a REXMAN lathe.
By Bruce Ford in forum METALWORK GENERALReplies: 5Last Post: 15th Aug 2015, 10:24 PM -
Anyone know about these lathes?
By oz94 in forum METALWORK GENERALReplies: 13Last Post: 6th Dec 2014, 04:10 PM -
Rexman - Brakenbury and Austin Lathe ?
By morrisman in forum METALWORK GENERALReplies: 4Last Post: 11th Nov 2011, 10:39 PM