Needs Pictures: 0
Results 1 to 15 of 21
Thread: An airgun refurb...
-
14th Aug 2016, 07:59 AM #1Novice
- Join Date
- Aug 2016
- Location
- Sheffield, England
- Age
- 65
- Posts
- 14
An airgun refurb...
Hi
I'm not sure if this would even qualify as 'Gunsmithing'
Anyhow, I bought this poor old Mk1 BSA Airsporter for next to nothing from a halfwit!!
He'd 'repaired' a break in the stock but had glued it with something like tile grout or adhesive, Whilst he was telling me about it he cocked it and then dry fired it which isn't recomended for spring powered airguns, the resulting thump of the unhindered piston made his stock repair let go! It actually saved me the job of possible making the stock even worse! (If that was possible!!)
The action had gone rusty then some bright spark painted over it with black gloss paint I had to clean almost every bit of the steel on the slack part of a 30"x1" belt sander, I then reblued it with Ballistol Klever blue, The action looked beautiful after I carded off the residue but after about three months of not even touching it, The blued finish had turned grey
Some pics of the repair work..
mk1a.jpg
mk1b.jpg
BSA Airsporter sc4.jpg
mk1c.jpg
mk1j.jpg
mk1g.jpg
mk1h.jpg
mk1d.jpg
mk1k.jpg
mk1l.jpg
mk1m.jpg
mk1o.jpg
mk1p.jpg
I still need to make an oversized round nut on my lathe to fit in the stock as the last owner had put a square nut in that resembled a roofing nut and it wore in to the wood so the factory part won't work any more
I made the filler from the dust that I saved whilst rubbing the stock down, I mixed it to a stodgy paste with PVA glue, I also made a piston head of steel bar and fitted an O-Ring as the leather parachute seal was kaput!!
I planed a bit of pine to fit inside the stock to the correct gap to stop it collapsing in when I lashed the two parts after glueing, 24 hours later I made two 7mm walnut dowels (Should have used beech as the colour would have been a better match!) After drilling two 7mm holes in the two parts of the stock that overlapped I then glued them in, another 24 hours later I sanded them down, I later protected the stock using Tung based oil hand rubbed in
BTW, I ran a Dremel cutting disc around the joints so that I could get the filler well in
PS, Sorry about the order of the pics, I tried posting them in order but they seem to have changed round in the uploading process
EDIT- I put the pics in the order that I think I posted them in..
Cheers, John
-
14th Aug 2016, 08:53 AM #2Philomath in training
- Join Date
- Oct 2011
- Location
- Norwood-ish, Adelaide
- Age
- 59
- Posts
- 6,561
Welcome to the forum John. A nice, neat save.
Pics can be dragged around/ dropped when you write your post.
Michael
-
14th Aug 2016, 09:38 AM #3Novice
- Join Date
- Aug 2016
- Location
- Sheffield, England
- Age
- 65
- Posts
- 14
-
14th Aug 2016, 11:33 AM #4
Nice work John.
I'm not sure if this would even qualify as 'Gunsmithing'
The nearest I have got to gunsmithing is changing the scope on my rifle. The old scope then got put to work lining up fence posts out in the paddocks.
From some reading I have been doing recently it appears that the UK and Australia have some of the strictest gun laws in the world. It was my understanding that it is almost impossible to get anything more powerful than an airgun in the UK. Is this correct? Lots of people own guns in Australia, but mostly in rural areas.
Dean
-
14th Aug 2016, 12:16 PM #5Golden Member
- Join Date
- Jan 2016
- Location
- Wodonga Vic
- Age
- 38
- Posts
- 633
Australia actually has even worse gun laws than anywhere, including the UK, you don't need a licence to own an air rifle in the UK and semi automatic rifles aren’t restricted there
-
14th Aug 2016, 02:39 PM #6
-
14th Aug 2016, 03:39 PM #7Most Valued Member
- Join Date
- May 2011
- Location
- Murray Bridge S Aust.
- Age
- 71
- Posts
- 5,959
Hi John,
Welcome to the forum.
If it's gun related it's gunsmithing. Your thread reminds me of about 20 years ago, I was spotlighting with friends and fired my Mossberg pump action 12 gauge, an almighty bang came out, everyones ears were ringing, next morning I noticed the the stock was split from end to end from what I can workout was a double charged factory load and I had a bruise on my shoulder for 2 weeks.
I got more in the gun amnesty, than I paid for it.
KrynTo grow old is mandatory, growing up is optional.
-
14th Aug 2016, 09:19 PM #8
Not quite on subject, but ...
A few years ago, maybe 2012, I was in Tunbridge Wells and waiting for a train.
The church on the south side of the station and down the road had a jumble sale.
There on the "one pound table" was an air pistol for sale, a Webley as I think back.
Couldn't bring it back of course.
That rifle reminds me of my old Gecado 35 with .177 and .25 barrels.
But it had traditional cup type compression washers.
Good luck.
-
14th Aug 2016, 09:42 PM #9Novice
- Join Date
- Aug 2016
- Location
- Sheffield, England
- Age
- 65
- Posts
- 14
Hi Dean
In the UK (Except for Scotland) Airguns can be owned wothout licence as long as the rifles don't exceed 12ft lbs muzzle energy and the pistols 6ft lbs, Scotland have brought as law out that ALL airguns need to be licenced but their police force strangely won't be able to cope with the licence requests and will struggle to enforce the new laws apparently so their nutjob politicians will probably make millions of people in to criminals for owning airguns that aren't licenced!! There are age restrictions for owning/using them though..
I fear the same ridiculous state of affairs will come south of the border to England as the revenue of £80 per licence will appeal to the money grubbing lot in parliament!!
To get a firearms cert for live round guns or airguns over 12ft lbs, One has to have a clean record with the police and a reason to own one, Either pest control on land with permission or to be a member of a shooting club that is certified for live round shooting..
If a person has been in trouble with the law nad have served a sentence of more than three years they can't own a gun of any kind- Not even an airgun as I understand and to own a pistol of over 6ft lbs is worse than having a rifle over 12ft lbs as all pistols over the 6ft lbs limit are banned apart from black powder shooters or something daft like they need to have a barrel length of over 12" and an overall length of 24"
Trouble is that they let the barmy old farts in power make these stupid laws that haven't the first clue of what they're doing!!
Cheers, John
-
14th Aug 2016, 10:53 PM #10Most Valued Member
- Join Date
- May 2011
- Location
- Murray Bridge S Aust.
- Age
- 71
- Posts
- 5,959
Sounds a bit like down under. It got to a stage, when guns were outlawed, only the outlaws had guns.
KrynTo grow old is mandatory, growing up is optional.
-
15th Aug 2016, 12:33 AM #11
Interesting web site
Trev's Airgun Scrapbook
-
15th Aug 2016, 12:38 AM #12
info
Interesting web site
Trev's Airgun Scrapbook
-
15th Aug 2016, 02:54 AM #13Novice
- Join Date
- Aug 2016
- Location
- Sheffield, England
- Age
- 65
- Posts
- 14
Hi mm
I already have Trev's site bookmarked, He has some beautiful old airguns!!
I let a friend have my HW98 and my BSA Airsporter RB2 some years ago, He's thinning his collect6ion now and I already have the HW98 back..
HW98c.jpg
HW98f.jpg
HW98g.jpg
The Airsporter is coming back to mine this coming week! (This will be number 139 )
BSA Airsporter RB2k.jpg
Thanks, John
-
15th Aug 2016, 01:34 PM #14
Thanks John. As Kryn said, it sounds similar to down under. I don't disagree all that much with the laws as they stand today. A lot of people complain about not being able to get semi-automatic weapons. They are available for landowners for the purpose of killing vermin, but only on the listed property(s) as far as I understand. I don't know of anyone who has one. I am perfectly happy with what I have. They don't get used much. The biggest use by far is for snakes, using 22LR pellet cartridges. For some reason they seem to favour locations which make them hard to capture by other methods.
Dean
-
26th Aug 2016, 05:59 PM #15Most Valued Member
- Join Date
- Nov 2007
- Location
- melbourne australia
- Posts
- 3,228
Hi John,
I'm currently restoring a BSA Meteor Mk5. What brand of Tung oil finish did you use on the stock?
The meteor came with a black painted barrel and cylinder from the factory. I plan to remove that with paint stripper and blue the barrel Birchwood Casey cold blue. Apparently heating the barrel in very hot water between coats of cold blue improves the finish.
Cheers,
Chris
Similar Threads
-
Sand Blaster Refurb Update
By Sterob in forum METALWORK GENERALReplies: 5Last Post: 6th Jan 2011, 04:36 PM