Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 9 of 9
  1. #1
    Join Date
    May 2018
    Location
    Tea Tree Gully
    Posts
    17

    Default Many Hercus parts - almost a whole lathe

    I have a number of Hercus 9" lathe parts which I would like to sell together. If no-one is interested I will advertise them separately. There is almost a complete lathe here, including three lathe beds, stand, gears, etc. Please look at the photos for more details. I am in metro Adelaide, SA. $1,000 For the lot. email: [email protected]
    Attached Images Attached Images

  2. #2
    Join Date
    May 2018
    Location
    Tea Tree Gully
    Posts
    17

    Default Hercus parts now available individually

    Update on the parts, the steady has been sold, I am now accepting offers on the individual items.

    Prices are as follows:

    Set of thread gears $300
    "H" pattern for support of drive train for the head stock $50
    Lathe bed risers and legs $300
    Lathe bed (3 available) $100
    Drive gear and bearings for headstock, $150
    Headstock driven gear including belt $150
    Short extension lathe bed $100
    Gear guard/cover $40
    Leadscrew (two available, see photos for details) $70 each
    Thread Gear box $450
    Six position stop $150
    Tailstock $250
    Orange tail stock device $50
    Mechanism for manual and auto feed $150
    Compound assembly $150
    Non Hercus tailstocks $100

    Gary
    Attached Images Attached Images
    Last edited by garygh; 12th Oct 2018 at 11:05 AM. Reason: Pricess posted

  3. #3
    Join Date
    Aug 2000
    Location
    Perth
    Posts
    34

    Default

    Hi Gary
    It's not eBay or Grays, it's a marketplace as it says on the front page of this section. Please put some prices up

  4. #4
    Join Date
    Aug 2008
    Location
    Tennant Creek, Aust
    Age
    61
    Posts
    596

    Default

    PM sent

    Ratty 05/2004 -05/07/2010 COOPER 01/08/1998-31/01/2012

  5. #5
    Join Date
    May 2018
    Location
    Tea Tree Gully
    Posts
    17

    Default

    Will do Darryn! Sorry, just trying to get myself organised. I should get this done later today.
    Cheers,
    Gary

  6. #6
    Join Date
    May 2018
    Location
    Tea Tree Gully
    Posts
    17

    Default

    An update on the parts available:
    The steady is sold. The six position carriage stop is sold. The set of gears is sold but the reverse assembly still available as is the change gear banjo (complete with an 80 and 100 tooth gears).

    In the pictures, the light green tailstock and other parts are NOT Hercus I now realise.

    Please don't hesitate to contact me via email if you have any questions about what is available: [email protected]

    Gary

  7. #7
    Join Date
    May 2018
    Location
    Tea Tree Gully
    Posts
    17

    Default

    Further update on parts available;
    The reverse tumbler assembly is sold, the change gear banjo is sold, the gear cover plate is sold. Still many parts available!
    Gary

  8. #8
    Join Date
    Oct 2011
    Location
    Norwood-ish, Adelaide
    Age
    59
    Posts
    6,540

    Default

    Gary, what lengths of bed do you have? I have a Sheraton bed that is too long for my application so if there is a shorter one I may be interested. Is the headstock still available?

    Michael

  9. #9
    Join Date
    May 2018
    Location
    Tea Tree Gully
    Posts
    17

    Default

    Hi Michael,
    I have three lathe beds that are 3'4" long (1015mm). There is also a 1'8" (about 503mm) short bed and a 1'1" (about 330mm) short bed. Yes the headstock is still available. There have been a few people looking for individual parts of the headstock, but I have resisted dismantling it for parts!
    Regards,
    Gary

Similar Threads

  1. Used Hercus Parts
    By Tiptoeturtle in forum THE HERCUS AREA
    Replies: 0
    Last Post: 11th Dec 2014, 09:54 AM
  2. Hercus 260 Lathe parts
    By bitza500 in forum THE HERCUS AREA
    Replies: 2
    Last Post: 17th Jan 2010, 10:16 PM
  3. Hercus Parts
    By Mark2 in forum THE HERCUS AREA
    Replies: 10
    Last Post: 6th Jun 2009, 08:54 PM
  4. Hercus parts on Ebay from Hercus
    By bollie7 in forum THE HERCUS AREA
    Replies: 0
    Last Post: 8th Oct 2008, 02:59 PM
  5. Hercus parts
    By nexusone in forum METALWORK GENERAL
    Replies: 1
    Last Post: 27th Jan 2005, 07:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •