Thanks: 0
Likes: 0
Needs Pictures: 0
Results 1 to 14 of 14
Thread: Taylor Hobson Cutter Grinder
-
25th Feb 2018, 12:30 PM #1Senior Member
- Join Date
- Jul 2007
- Location
- Perth
- Posts
- 332
Taylor Hobson Cutter Grinder
Taylor Hobson Model G engraving / D bit cutter grinder 240 volts in very good condition for age, runs smoothly, complete with a diamond grinding wheel and all holders for taper and straight shank bits along with all cams for relief angle grinding, some are duplicates.
Original operators handbook and operator instruction card looking for $600.
Prefer pickup Perth, but may consider boxing for freight at buyer cost, estimate total weight around 20Kg.
Any questions let me know. Thanks.
grinder1.jpggrinder2.jpggrinder4.jpggrinder5.jpggrinder6.jpg
-
3rd Mar 2018, 11:21 AM #2
What condition are the brgs?
-
3rd Mar 2018, 04:59 PM #3Senior Member
- Join Date
- Jul 2007
- Location
- Perth
- Posts
- 332
No audible noise from bearings when running only wind noise from wheel and nothing noted when turned by hand.
-
3rd Mar 2018, 05:11 PM #4
What do you reckon freight to Adelaide would cost?
-
3rd Mar 2018, 05:18 PM #5Senior Member
- Join Date
- Jul 2007
- Location
- Perth
- Posts
- 332
Not sure, its a long weekend in WA so can inquire on Tuesday, but reckon all up around 20Kg but will weigh it in the meantime to confirm. Suspect it would have to go by road freight.
-
3rd Mar 2018, 09:06 PM #6
-
4th Mar 2018, 05:12 PM #7Senior Member
- Join Date
- Jul 2007
- Location
- Perth
- Posts
- 332
Ok actual machine only is 21.5Kg based on bathroom scales + packaging say around 8Kg so reckon around 30Kg. I have a short video of the grinder startup and running but it too large to post (20mb) if you want to PM me your email address I can try and send it.
-
5th Mar 2018, 12:13 PM #8
If you can post to here for total of $600 I can afford to take it off your hands.
Otherwise I'll have to let it slide.
Cheers alby
-
5th Mar 2018, 01:50 PM #9Senior Member
- Join Date
- Jul 2007
- Location
- Perth
- Posts
- 332
Can you give me your postcode and shall see what freight is tomorrow. Private message me your info would be best.
-
5th Mar 2018, 04:00 PM #10
5039
-
5th Mar 2018, 04:47 PM #11
5093
-
5th Mar 2018, 04:50 PM #12Senior Member
- Join Date
- Jul 2007
- Location
- Perth
- Posts
- 332
Alby / Joe thanks.
-
5th Mar 2018, 06:23 PM #13
close
-
13th Mar 2018, 08:25 PM #14Senior Member
- Join Date
- Jul 2007
- Location
- Perth
- Posts
- 332
Item sold and making its way across the Nullarbor. Thanks.
Similar Threads
-
No.3 tool and cutter grinder
By allterrain50 in forum THE HERCUS AREAReplies: 7Last Post: 25th Jun 2014, 12:32 AM -
Taylor Hobson Mirco Alignment Scope
By Ueee in forum METALWORK GENERALReplies: 10Last Post: 9th Jan 2014, 10:43 PM -
Another Tool And Cutter Grinder
By Anorak Bob in forum METALWORK GENERALReplies: 26Last Post: 13th Nov 2013, 12:15 PM -
Tool and Cutter Grinder
By Jors in forum METALWORK GENERALReplies: 13Last Post: 17th Oct 2012, 07:32 AM -
Tool and cutter grinder
By 12teethperinch in forum THE HERCUS AREAReplies: 0Last Post: 3rd Nov 2010, 03:49 PM