Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Heating Oil - moved from Foundry
-
5th May 2017, 10:25 AM #1
Heating Oil - moved from Foundry
G'day,
I have heating oil that i want to sell if anyone is interested. Should work fine for a oil burner, $100 for 200 liters. I have 200L drums or bring your own drums. I can pump the oil into the drums as well.
Pick up from eastern suburb melbourne.
Cheers,
Mark.
-
24th Jan 2018, 04:15 PM #2
G'day, I also have use veg oil which works well for a oil burner, have 180 liters in 20 liters drums all free. And the heating oil i have in 200 liters drums x 3 all free as well, i have to much and will never use it all.
Cheers,
Mark.Resize of IMG_6361.jpg
-
28th Jan 2018, 11:35 AM #3
Last call for the veg oil,if no one is inserted by end of next week will take it to the recyclers. Will still have the heating oil.
Cheers,
Mark.
-
28th Jan 2018, 09:26 PM #4Golden Member
- Join Date
- Mar 2009
- Location
- Melbourne
- Age
- 54
- Posts
- 825
G'day Mark,
Before you Recycle your veggie oil try listing it on eBay.
I ran my old Hilux on used veggie oil but sold off my remaining oil stock, about 300lt on eBay when I got my new ute. This was about three years ago and from memory I got around $150.00 for it So it might be worth a try. Unless things have changed, even the recyclers should pay you for it.
Cheers,
Greg.
-
28th Jan 2018, 09:54 PM #5
G'Greg,
Yeah i have it on gumtree for $70. The recyclers will take it for free, just need to make some room in the workshop and i have enough oil for my keg furnace to keep my going for a while. As for the heating oil i have to pay to get rid of it, looks like i will need to spend a lot of hours in the workshop this winter and run my smudge pot heater which works really well with heating oil
Cheers,
Mark.
Similar Threads
-
Oxy heating tip vs welding tip
By Matt_M in forum METALWORK GENERALReplies: 5Last Post: 11th Jan 2015, 06:31 PM -
LPG heating torches
By shedhappens in forum METALWORK GENERALReplies: 67Last Post: 31st Aug 2012, 10:36 PM -
Heating jig
By Tiger in forum METALWORK GENERALReplies: 10Last Post: 2nd Mar 2006, 08:16 PM