Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2009
    Location
    Boronia Australia
    Posts
    49

    Default Hercus Craftsman for Sale

    Hercus Craftsman for sale, unit B
    This lathe has been stripped cleaned and re-painted, see pictures below, all bed ways and slides are in great condition apart from the very minor dents as shown. Yes there are a couple of teeth missing from the back gear, but I believe there are a number of members on this Forum who can repair these.
    I have replaced all the bearings in the countershafts and drive assembly, all belts have been replaced including a new polyurethane (non-stretch) link belt to the headstock
    I have also fitted a new 1 horse power single phase motor to provide plenty of power, all of the old 3 phase switchgear is still in place and I can provide the original motor.
    Equipment included as follows
    3 jaw chuck, Face plate, catch plate and a set of 15 collets from 1/16” to ½”
    Price $1800-00
    Note this machine is listed exclusively on this Forum in order to give the members first chance, if no early interest then it will be listed elsewhere.
    This item is located in Boronia Vic

    .HPIM5665B.jpgHPIM5667B.jpgHPIM5668B.jpgHPIM5669B.jpgHPIM5670B.jpgHPIM5671B.jpgHPIM5672B.jpgHPIM5673B.jpgHPIM5674B.jpgHPIM5675B.jpgHPIM5676B.jpgHPIM5677B.jpgHPIM5678B.jpgHPIM5680B.jpg

  2. #2
    Join Date
    Apr 2009
    Location
    Boronia Australia
    Posts
    49

    Default

    Hi All
    This machine is now being advertised elsewhere
    Cheers
    Ray

Similar Threads

  1. ....another proud Hercus Craftsman owner!
    By JC80 in forum THE HERCUS AREA
    Replies: 11
    Last Post: 21st Jun 2015, 10:13 PM
  2. Hercus Craftsman Spindle Help!
    By anj909 in forum THE HERCUS AREA
    Replies: 2
    Last Post: 3rd Feb 2015, 07:54 PM
  3. hercus for sale
    By bt 66 in forum THE HERCUS AREA
    Replies: 14
    Last Post: 15th Jun 2011, 11:38 PM
  4. hercus craftsman?
    By gallegos in forum THE HERCUS AREA
    Replies: 4
    Last Post: 10th Mar 2011, 09:23 AM
  5. 9" Hercus Craftsman Change Gears
    By Mark2 in forum THE HERCUS AREA
    Replies: 3
    Last Post: 22nd Feb 2010, 06:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •