Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 2 of 2
  1. #1
    bitza500 Guest

    Default Gearbox troubles

    Hi Guys, well after such lovely weather and a lot of painting done
    I have started to assemble the gearbox
    PROBLEM somewhere someway I have managed to stuff up the 2 lever and their gears??
    So has anybody got a Model A Gearbox off their lathe that is complete
    That they could take a picture of the underside of the box as
    I have got the levers on but the plate at the bottom will not fit anyway anyhow so can anybody help as I am stumped

    Next drama has anybody got any spares for the apron of a Model A as I assembled the apron as well and fitted the ecentric and the handle
    Knocked in the tapered pin and the ecentric snapped into 2 pieces ???

    So I have had a very Constructive/Destructrive day and would really be greatfull for any help as the gearbox is not something you pull apart unless you are very game or have drawings of each item

    I had the drawings but somewhere along the line I have STUFFED UP
    So any help ???

    all the best Derek

  2. #2
    Join Date
    Sep 2008
    Location
    Prince George BC Canada
    Posts
    89

    Default Emailed u a pic

    derek check your email, I sent u a pic of mine which I just took off yesterday to begin restoration.
    Also I replied to your email regarding my parts, please get back to me when u can.
    al
    Remember if the ID exceeds the OD the hole will be on the outside!

Similar Threads

  1. Gearbox oil
    By Dingo Dog in forum METALWORK GENERAL
    Replies: 7
    Last Post: 11th Jun 2008, 05:06 PM
  2. Makita Cut Off Saw Troubles
    By under thumb in forum METALWORK GENERAL
    Replies: 13
    Last Post: 29th Jun 2007, 05:08 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •