Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    BobL is offline Member: Blue and white apron brigade
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    7,182

    Default Free switch gear

    I am stripping off all the old 3P switch gear from my Hercus mill and fitting a VFD into the space where the old switchgear resides..
    If anyone wants any of this for nothing - local pick up or the cost of posting send me a PM.

    Am prepared to separate the switches from the contactor.

    The switches by themselves will meet the specifications of a 1.5kg Aust Post satchel so that will cost $13.80.

    The Transformer is cooked so I will remove that and weigh the contactors if anyone wants these.

    Switchgear.jpg Switchgear2.jpg

    I hope I don't offend too many purists with this move.

  2. #2
    Join Date
    Jul 2011
    Location
    Adelaide
    Posts
    837

    Default

    I got excited for a moment. I am looking for an original OFF switch for a Hercus #1 T&C grinder. Unfortunately not the same switch. You probably know what the board the switch gear is mounted on is made of. It is written on the back.

  3. #3
    BobL is offline Member: Blue and white apron brigade
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    7,182

    Default

    [QUOTE=lamestllama;1935328]I got excited for a moment. I am looking for an original OFF switch for a Hercus #1 T&C grinder. Unfortunately not the same switch.

    Too bad about that.

    You probably know what the board the switch gear is mounted on is made of. It is written on the back.
    Yes I noticed that. Don't worry I won't be sending that through the post.

  4. #4
    Join Date
    Aug 2012
    Location
    Greenmount, W.A.
    Age
    70
    Posts
    272

    Default

    Bob,
    PM sent.
    Regards,
    Alan.

Similar Threads

  1. Hercus Gear Rack - short lengths - 48F6R - Free
    By John T K in forum METALWORK - Machinery, Equipment, MARKET
    Replies: 3
    Last Post: 20th Apr 2018, 07:02 AM
  2. Switch Enclosure- Switch Position Identification.
    By Anorak Bob in forum METALWORK GENERAL
    Replies: 17
    Last Post: 19th Jul 2016, 11:00 AM
  3. Wax free, solvent free polishing compound ?
    By mike rolly in forum METALWORK GENERAL
    Replies: 10
    Last Post: 28th Apr 2015, 10:02 AM
  4. Gear tooth count on Back/Bull Gear.
    By pipeclay in forum THE HERCUS AREA
    Replies: 31
    Last Post: 6th Jan 2010, 11:56 AM
  5. Metal gear / worm gear needed
    By colinshannon in forum METALWORK GENERAL
    Replies: 14
    Last Post: 29th Mar 2007, 10:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •