Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 20
Thread: Bossweld.
-
17th Apr 2018, 07:27 PM #1Banned
- Join Date
- Jan 2018
- Location
- Aldinga Beach.
- Age
- 73
- Posts
- 148
Bossweld.
I see Bunnings is now selling Bossweld welders. I had a quick look, they look fairly well made, all steel components in the feed chain. Anyone have one and can write a review.?
-
19th Apr 2018, 07:54 AM #2Most Valued Member
- Join Date
- Sep 2010
- Location
- Lebrina
- Posts
- 1,915
I don't personally own one, but my local welder retailer/repairer is happy to sell some of their machines as a budget alternative to their higher end gear. That speaks volumes in my book as their business is not structured around volume equipment sales and they refuse to sell rubbish, preferring to miss a sale than degrade their reputation.
-
19th Apr 2018, 09:43 AM #3Member: Blue and white apron brigade
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 7,189
I was in at Bunnings yesterday and had a quick look at them.
There seems to be 3 price brackets. ~$200, ~$400 and then $700+
I just did a check on the web at their Duty cycles
The basic 140A machine is a whopping 10% @140A, the S180 is 15% @180A - ie no different to most other budget end welders.
The Stick/MIG/TIG MS195 machine, a $750 180A machine is 17% for MIG, 30% for TIG and 13% for MMA.
The higher end units are touted as Trades machines but somehow I doubt it.
-
20th Apr 2018, 05:22 PM #4Most Valued Member
- Join Date
- Sep 2010
- Location
- Lebrina
- Posts
- 1,915
Those aren't very impressive figures at all, particularly for the 140A machine and I must say I'm a little surprised at them, however even high end inverters have relatively low duty cycles when maxed out. I would like to see a rating at say, 50 or 60% duty cycle for stick welders as 60% is about the maximum that it is possible to reach stick welding. I am quite partial to the Jasic machines (25% @ 170A and 100% @ 85A) as they are well built and while not the absolute cheapest on the market, they weld nicely and are backed by a 3 year warranty. With 20% @ 180A, I would expect that the Bossweld would run 3.2mm sticks all day for most users at lesser amperages like 120 - 130A.
-
20th Apr 2018, 07:56 PM #5Member: Blue and white apron brigade
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 7,189
-
20th Apr 2018, 08:59 PM #6Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 6,218
I have a Rossi 200 amp stick inverter unit. They sell for around $140 delivered. I have burned many a 4mm low hydrogen iron powder rod with it and it has not gone poof. I do not think has the high frequency start that the more expensive ones do, but I found it a great cheap welder.
Gold, the colour of choice for the discerning person.
-
21st Apr 2018, 01:56 AM #7
Our local men's shed has a Bossweld 140a stick inverter welder and it's a little pearler. It's now the "go to" welder as its so light to carry and handles just about all the jobs we do in the shed. Mainly up to 6mm and we've just made a set of driveway gates from 50mm galvanised pipe. The old cig unit just doesn't get used anymore.
Pat
-
24th Apr 2018, 09:00 PM #8Banned
- Join Date
- Jan 2018
- Location
- Aldinga Beach.
- Age
- 73
- Posts
- 148
-
24th Apr 2018, 09:37 PM #9Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 6,218
No, new..
https://www.ebay.com.au/itm/NEW-ROSS...e/140767884943
You can get smaller ones cheaper.Gold, the colour of choice for the discerning person.
-
24th Apr 2018, 10:02 PM #10
The length of the leads might irritate some folks.
The ones I saw were about 1.2m long. I like the tong electrode holder but its not 200 amp rated and neither is the earth return clamp. The shorter the leads are the greater chance of the unit prematurely sucking up some grinder dust and shortening its life span.
The formed A clamp was pretty lightweight and the spring too light. You will see that in most of them these days.
Still, for that price point, something had to be made cheap.You can also upgrade the leads at a later time.A fair little unit for the dollars.
Grahame
-
25th Apr 2018, 11:12 PM #11
I think the cables are a problem with many or all the cheap welders. My inverter stick welder and also my MIG came with leads way too short and nowhere near the welders' ratings. They got hot in no time and I replaced them with sensible sized cables, along with proper work clamps and electrode holder.
Sent from my InFocus M808 using TapatalkCheers, Joe
retired - less energy, more time to contemplate projects and more shed time....
-
25th Apr 2018, 11:23 PM #12Member: Blue and white apron brigade
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 7,189
I did the same - felt a bit silly even spending ~ $65 on new cables, earth clamp and electrode holder when the whole stick welder only cost $99. Then I threw more money at it by adding a couple of big heatsinks t the tranny and a fan to the case which brought the extra $$ spent on it to more than $99. The net effect on duty cycle was to increase the number of 3.2mm rods I could weld continuously from 4 to 5 before the thermal cutout kicked in. In the end the duty cycle drove me bonkers and I sold the welder $75.
-
26th Apr 2018, 05:14 AM #13New Member
- Join Date
- Mar 2018
- Location
- USA, Oakville
- Posts
- 5
Wouldn't expect much performance from a $99 or $200 welder. If you use it regularly, I'd invest a bit more in a solid Miller, Lincoln or Hobart welder..
-
26th Apr 2018, 08:31 AM #14Member: Blue and white apron brigade
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 7,189
Sure - but it was some time ago, part of my welding (ancient) history.
Back in 1979 I borrowed a Transarc 140? from a BIL who passed away a few months later so with the permission of his family I hung onto it until some 20 years later when his son came and asked for it back and that's when I bought the $99 special. Apart from it being all I could afford at the time, I only needed a small welder for small tasks. A couple of years after that I started doing more with it and that's when I realised its limitations. I thought about purchasing a new/better welder and sought advice from my boilermaker BIL (he had 5? welders at the time) and he loaned me his smallest machine, a $900 Rainbow MMA/TIG inverter portable while I thought about what I would buy. The Rainbow was a great machine but 5 years later he also asked for it back and that's when I bought the MetalMaster 210 from TokenTools and that has been a very good machine.
-
26th Apr 2018, 01:54 PM #15
Thats fine if you are working full time and are paying American prices.It is much different here in Australia.
A Lincoln 225 ac/dc welder might be $320 US in say, Lowes box store. Down here that same/similar welder is more than double that after the $ exchange and some duties and tax .
Its agreed that buying a welder from a well-known company that has a long-standing history and reputation is the best option. It's all too easy to advise people but first, one needs to understand their situation. I know I have certainly been guilty of that on ocassion.
There are other situations that impact upon the purchase of welding machine. The greatest of these is financial. Not everyone wanting to buy a welder has a best buy option open to them.
When you are on a fixed income, as many us are, the options are greatly reduced in what money is available for the welder purchase.
The choice is then somewhat more difficult as one is forced to choose "the best of a bad lot", so to speak.
When buying like this, we must make ourselves fully aware of what the limitations of a budget price machine will be.
Grahame
Similar Threads
-
Bossweld (Bunnings) Welder?
By jack620 in forum WELDINGReplies: 35Last Post: 11th Nov 2017, 05:25 PM