Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 20 of 20
-
15th Jun 2017, 08:08 PM #16Most Valued Member
- Join Date
- Aug 2009
- Location
- Sydney, NSW, Australia
- Posts
- 1,836
I got all my pieces cut/notched and cleaned ready to weld i have so far both completed sides i just need to square up both sides and weld on the top and back pipes than shes ready to fit
i have came up with a idea where the 4 canopy legs of the 32mm round tube will slot into 4x 40mm square tubing bases that will be bolted to the boat than i will use 4 quick remove pins to lock the canopy in place
this will allow me to remove the canopy for towing and place it within the boats seating area and only erect it while at the boat ramp
as for the Chinese spool guns on ebay for $50-$100 they do work and they do work well but there are some teething problems, i have mine wired to my ESAB mig 150, i found the included spool is much thinner than the stock spools we purchase from the welding supply stores so i removed the spool stud and screwed in a M8 bolt which holds on the .5kg alloy wire spool but this creates a problem the small gold spool stopper binds on the inner .5kg spool so u may need to modify it
the other option is re-spooling the Chinese spool gun spool with wire Ha good luck with that
i went with the easiest possibly design to build as pictured, also the Hare and Forbes pipe notcher worked great with a 32mm LENNCO i think branded hole saw bit, my fit up's were 95%+ and very easy to weld
-
15th Jun 2017, 08:57 PM #17the other option is re-spooling the Chinese spool gun spool with wire Ha good luck with that
Dean
-
17th Jun 2017, 08:01 PM #18Most Valued Member
- Join Date
- Aug 2009
- Location
- Sydney, NSW, Australia
- Posts
- 1,836
No progress today i thought it was going to rain
Hey Dean, I don't have a lathe mate, i was thinking of running a bolt thru the empty spool and chucking it on the bench drill low speed to spool it up
-
17th Jun 2017, 09:26 PM #19
That will work. Make the bolt tightness so you can stop the spool by gripping the wire. Maybe use a spring. Easiest to have a clamping device a distance from the spool so you can apply some pressure to the wire to hold the tension then you can just control the position of the wire on the spool with your fingers. Clamp the wire between some bits of leather or similar.
Dean
-
21st Jun 2017, 05:18 PM #20Most Valued Member
- Join Date
- Aug 2009
- Location
- Sydney, NSW, Australia
- Posts
- 1,836
Got the frame welded today came out pretty good now i need to make the leg mounts
Similar Threads
-
I want to make my first copper wall art
By tomk38 in forum METALWORK GENERALReplies: 2Last Post: 28th Nov 2013, 09:41 AM -
LCD wall mount
By garfield in forum METALWORK GENERALReplies: 8Last Post: 1st Jun 2009, 06:46 PM -
Wall mounted racks.
By Yonnee in forum TRAILERS & OTHER FABRICATED STUFFReplies: 2Last Post: 22nd Feb 2009, 12:32 AM -
Off the wall question
By Mobil Man in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 4Last Post: 20th Dec 2008, 02:21 AM