Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
27th Apr 2017, 09:18 PM #1Tool addict
- Join Date
- May 2008
- Location
- Perth
- Posts
- 241
Anyone had any experience with the old WIA Weldmatic 335?
So yeah, kinda won one in an auction today, haven't had a chance to get it home yet, thought I'd see if there's any particular quirks or weak points to keep an eye out for.
Darn, now I really need to get the three phase to the shed connected!
Photo for reference, I saw by googling that it looks like there's a couple of different generations of the machine.
15573075.jpg
-
3rd May 2017, 08:59 PM #2Most Valued Member
- Join Date
- Sep 2010
- Location
- Lebrina
- Posts
- 1,910
Haven't found a 3 phase WIA that I didn't like.
Probably copper windings and made the way welders should be made.
-
12th May 2017, 07:33 PM #3
Built like brick dunnies.
The only negative thing I can remember was the Bernard style torch that had the trigger on the outside of the gun- opposite to the other brands.
the trigger would latch at the wrong and most inopportune moments.
-
13th May 2017, 07:07 PM #4Tool addict
- Join Date
- May 2008
- Location
- Perth
- Posts
- 241
Cheers Karl and Grahame, now I really need to get the power sorted so I can give this old girl a whirl
The torch that came with it is a style that I really don't like, when I was doing factory work it was much as you say Grahame, you'd be positioning yourself and you'd trigger the bugger, or you'd put it down for a moment and it'd start spooling out and make you jump when it arced. Thankfully I've got a torch that I grew very fond of, looking forwards to running some wire through it again
-
13th May 2017, 07:33 PM #5Most Valued Member
- Join Date
- Sep 2010
- Location
- Lebrina
- Posts
- 1,910
I'm trying to picture which Bernard Mig Gun has the trigger style that you are describing. Pretty well all the Bernard guns I've used have been the Q gun style as pictured and I cannot recall having that particular issue with them.
Bernard_Q_Gun_400_900x900.jpg
-
14th May 2017, 05:43 PM #6Diamond Member
- Join Date
- Aug 2006
- Location
- Melbourne
- Posts
- 1,105
I've used that mig gun pictured above as well, probably the most reliable gun I have ever used, easily handled the abuse it was given
-
14th May 2017, 08:45 PM #7
Karl,
I possibly have them confused or the one I remember is an earlier model.
The trigger was on the upper side of the "barrel" and made from metal. It would be circa mid seventies. These guns old then. The body that the trigger was mounted on was brown bakelite cylinder shape.
The were mongrels at the end of the run and instead of switching off would often latch on and bugger the start / finish match up of a pipe run bead.
The trigger was operated with the thumb and was damn uncomfortable to hold on for any length of time. We eventually ended up with Twecos to keep inventory spares down to one or 2 models.
-
15th May 2017, 12:20 AM #8Most Valued Member
- Join Date
- Sep 2010
- Location
- Lebrina
- Posts
- 1,910
I think I remember such a beast now you mention it. I haven't used one, but I can see how that arrangement would be a problem.
Similar Threads
-
X2 electrical experience??
By KBs PensNmore in forum METALWORK GENERALReplies: 5Last Post: 21st Aug 2015, 06:21 AM -
Removing seized feed roller on WIA Weldmatic 150S?
By Scan_Fan in forum WELDINGReplies: 2Last Post: 18th Oct 2014, 03:38 PM -
The Chinese experience
By th62 in forum METALWORK GENERALReplies: 77Last Post: 17th Jun 2013, 01:51 PM -
A Very Pleasing Experience
By Ray39 in forum WELDINGReplies: 1Last Post: 22nd May 2013, 05:51 PM -
7016 vs 7018 what's your experience
By beefy in forum WELDINGReplies: 10Last Post: 4th Feb 2013, 01:08 AM