Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Jan 2010
    Location
    Sydney Australia
    Posts
    29

    Default About to buy a TIG. Any comments or suggestions before I purchase?

    Hi all, I'm an ex panel beater with many years of MIG welding experience but minimal time on a TIG. I've been out of the trade for a while now but still keep my eye in every now & again on steel.

    I've finally gained permission to buy a TIG for the home garage & at this point I'm leaning towards one of these based on feedback on this site.
    Welding AC DC Tig inverter welder 200 amp tig welding machine tig welders Alupulse including foot control and gas regulator

    200 amp AC/DC with a foot pedal & reg for $1600.
    It'll be mainly used for light alloy work, 5mm & under & primarily for work on the tinny (boat).

    Does anyone have any current feedback on these, any concerns, any suggestions etc before I cough up the money?
    Thanks.

    Al

  2. #2
    Join Date
    Feb 2010
    Location
    Ballina, NSW
    Posts
    900

    Default

    I've go the older alusync 200 which has a similar feature set to this model. I'm very happy with it and the company - search for some of my previous posts. 50% of my welding would be on aluminium including the tinny. Cheers - Mick

  3. #3
    Join Date
    Dec 2010
    Location
    NINGI Qld Australia
    Age
    68
    Posts
    208

    Default

    Yeah I bought a similar spec but 3phase machine, powertig 250EX about a year ago, and with my limited experience seems do perform nicely on all metals. The TT machines seem to be supported here in Aus too being handy and I would imagine perform well from alll reports.

  4. #4
    Join Date
    Jan 2010
    Location
    Sydney Australia
    Posts
    29

    Default

    Thanks guys.

    Al

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •