PDA

View Full Version : SOLD: 3 Phase 240V/415 0.75KW motor



Ch4iS
11th Jun 2012, 06:55 PM
Up for sale is a 3 Phase 0.75KW SEW Branded Motor. (240V/415V)

This motor came with the lathe I purchased about 6 months ago, I was informed it was a brand new motor that was purchased ~10 years back. The motor has been tested on 240V 3 phase and ran without a drama but because there was also a 3 phase 1.1KW motor available I installed that on the lathe.

Overall in good condition apart from some rust on the shaft.


Asking Price: $60

I've also got a 415V plug and cable if the winner wants it.

Pickup from Mount Annan, NSW 2567 or I can post it via Australia Post.

Acco
11th Jun 2012, 08:06 PM
What would postage to 3799 cost?

Ch4iS
11th Jun 2012, 08:58 PM
What would postage to 3799 cost?

As a rough quote it'll cost around $28.25 via Registered Post.

Currently its at a storage unit so I'll need to double check the weight if you're interested, but the above quote is for 15KG.


------------------------------------------------

To anywhere in the Australia Post NSW metro network it'll cost $11.70 via Registered Post. (It's a fixed rate up-to 20KG)

Acco
11th Jun 2012, 09:28 PM
If you could check the weight out that'd be good :2tsup:

Could you also measure the shaft dia and length as well please.

Ch4iS
12th Jun 2012, 05:53 PM
Shipping weight is 13KG which includes the 415V plug and cable.

$26.35 to 3799

------------------------------

I had forgotten to bring the calipers with me but the shaft looks to be 19mm diameter, with a length of 40mm from the groove on the shaft. (Measured with tape measure)

------------------------------

Some extra pictures of the spec plate and internals.

Acco
12th Jun 2012, 05:58 PM
I'll take it, could you PM me payment details please.

Ch4iS
14th Jun 2012, 05:51 PM
Sold